The short answer
Fireplace and damper repair fixes the parts that control fire and airflow: cracked firebrick, failing mortar, rough smoke chambers, and dampers that stick or leak. If your fireplace smokes, smells, lets in cold air or water, or sheds brick, FirstChoice Chimney Services' certified technicians in New York can find the cause and repair it cleanly.
A fireplace that smokes into the room, a damper that won't close, or brick crumbling at the back of the firebox all point to the same thing: the parts that control fire and airflow need attention. FirstChoice Chimney Services repairs fireboxes, dampers and smoke chambers for homeowners in New York and nearby neighborhoods, from brownstones and townhouses to single-family homes with masonry fireplaces. Our certified technicians work out why the problem is happening, show you what they find, and fix the cause instead of covering up the symptom. Here is what that looks like, from the first warning signs to the finished repair.
Signs you need fireplace or damper repair
Fireplace and damper problems usually build up slowly. Many owners first notice them at the start of the burning season, or when a cold draft reaches the living room in the middle of winter. If you see any of the following, have the fireplace looked at before your next fire.
- A smoke or creosote smell in the room, especially on humid days or when the fireplace isn't in use
- Poor draft: smoke rolls out of the fireplace opening instead of going up the flue
- Brick flakes, crumbled mortar or pieces of firebrick collecting on the firebox floor
- White, chalky staining on the brick inside or around the fireplace, a sign that moisture is moving through the masonry
- Scratching, chirping or nesting sounds above the damper
- Water or damp ash in the firebox after rain
- A damper handle that is stuck or loose, or a damper that won't seal or drops open on its own
- Cold air coming from the fireplace when the damper is supposed to be closed

What's included in a repair visit
Every repair visit starts with a look at the whole fireplace, not just the part you called about. A failing damper and a cracked firebox are often caused by the same moisture or draft problem higher up in the chimney, so we check for that before we start fixing anything.
- Inspection of the firebox, damper, smoke chamber and visible flue, with a camera where the flue can't be seen directly
- Cleaning soot and creosote from the firebox and smoke shelf before repair work begins
- Replacing cracked or missing firebrick and repointing firebox joints with refractory mortar made for fireplace heat
- Repairing or adjusting the existing throat damper, including the handle, pivots and seal
- Replacing a damper that can't be repaired, or installing a top-sealing damper at the top of the flue where it suits the chimney
- Parging rough or gapped smoke chamber walls when needed
- Checking the chimney cap and crown for gaps that let in water or animals
- Photos and a plain-language written summary of what we found and what we did
How our crew works in your home and on the roof
Inside, the crew lays drop cloths from the entry door to the hearth and covers the fireplace opening before any brushing starts. HEPA vacuums run during cleaning, so soot is pulled out of the air instead of settling on your floors and furniture. Rotary brushes clear the firebox, smoke shelf and lower flue, and a camera lets us show you the inside of the flue and smoke chamber on a screen rather than asking you to take our word for it.
On the roof, technicians check the crown, cap and top of the flue, and install caps or top-sealing dampers when that's part of the job. Roof access in New York ranges from a hatch in a row house to a ladder on a pitched roof, so we confirm how to reach yours before the visit. When the work is finished, we vacuum the area and take up the drop cloths last.
Time for your annual chimney check?
The standard we follow
Our work follows NFPA 211, the national standard for chimneys, fireplaces and vents. It calls for these systems to be inspected once a year, and a damper or firebox repair is a good time to confirm the rest of the chimney is sound.
Chimney professionals use three inspection levels. Level 1 applies when nothing about the system has changed. Level 2 applies when the system changes, for example a new appliance or a switch of fuel, or when the home is being sold. Level 3 is used when a hidden hazard has to be reached by opening part of the chimney or the building. We'll tell you which level fits your situation and explain why.
What affects the price
We quote after we've seen the fireplace, because two fireplaces with the same symptom can need very different work. The main factors are:
You'll have the price before work begins. If we find something unexpected partway through, we stop and talk it over with you before going further.
- The height of the chimney and how hard it is to reach the roof
- Fuel type: wood-burning, gas logs, or a fireplace that has been converted
- Flue size, shape and condition
- How much soot and creosote has built up
- Whether a camera inspection is needed to see the smoke chamber or flue
- Scope of repair, from adjusting a damper to replacing firebrick, rebuilding a smoke chamber or adding a top-sealing damper
How a visit works
When you contact us, we ask what you've noticed, what fuel you burn and how we can reach the roof. That way the technician arrives with the right tools and enough time set aside.
At the visit, the technician protects the room, inspects the fireplace and damper, and walks you through photos or camera footage of what they found. You get a clear explanation of the cause, your repair options and the price for each. Smaller repairs, such as freeing a stuck damper, can often be done the same day; larger masonry work is scheduled once materials are ready.
Afterward, you receive a written summary with photos, so you have a record for your next yearly inspection or a future home sale.

