Skip to content

What Chimney and Air Duct Work Costs, and Why

Homeowners often ask what a chimney sweep or duct cleaning costs before anyone has looked at the job. The honest answer is that it depends on what we find: how tall the chimney is, how we reach it, what fuel it burns, how much buildup is inside, and how your building handles access. This page explains what raises or lowers the price of each of our services, how we quote, and what to watch for in very cheap advertised offers. Once we see the job, you get a written price before any work starts.

What affects the price of a chimney sweep and inspection

A sweep is mostly labor, so anything that adds time or difficulty changes the price. In New York that often comes down to access: a brownstone with a steep roof, a co-op where the super has to open the roof door, or a house where the flue can only be reached from the fireplace below.

The NFPA 211 standard calls for chimneys, fireplaces, and vents to be inspected once a year. A Level 1 inspection is a visual check of the accessible parts of the chimney and fireplace, and it fits when nothing about your system has changed. A Level 2 inspection goes further. We run a camera through the full length of the flue, and it is called for when you add or change an appliance, switch fuels, or buy or sell a home. It takes more time and equipment, so it costs more than a Level 1. A Level 3 inspection, which means opening part of the chimney or building to reach a hidden hazard, is quoted separately and only when a specific problem calls for it.

  • Height and roof access: tall chimneys, steep or slate roofs, and buildings that need ladders, harnesses, or building staff to reach the roof take more time.
  • Fuel type: wood-burning fireplaces build up creosote, while oil and gas appliances leave soot, scale, or debris that calls for different tools.
  • Flue size and condition: oversized, unlined, or damaged flues are harder to clean and may need extra work.
  • Amount of buildup: light soot sweeps out quickly, while heavy or glazed creosote takes longer and sometimes needs a separate removal step.
  • Blockages: nests, fallen debris, or a stuck damper add time.

Repairs, liners, and rebuilding

Repair prices depend on what is broken and how much of it there is. Repointing a few joints near the crown is a very different job from rebuilding the chimney above the roofline. Before we write anything down, our certified technicians look at the masonry, flashing, crown, cap, and damper.

  • Chimney repair and rebuilding: how much mortar is cracked or missing, how much brick is spalled, the condition of the crown, and whether scaffolding or roof protection is needed.
  • Chimney liner installation: the flue's size and shape, the appliance it serves, the liner material, and how straight the flue runs. When a New York City building converts its boiler from oil to gas, the chimney has to be evaluated, and a new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue.
  • Chimney cap and chase cover: the size and shape of the chimney top and whether a standard or custom-fit part is needed.
  • Chimney waterproofing: how much masonry is exposed and whether repairs have to come first so the sealer goes on sound brick.
  • Fireplace and damper repair: whether the damper can be fixed or needs replacing, and the condition of the firebox.

Air duct and dryer vent cleaning

For ducts, the biggest factors are the size of the system and how easy it is to reach. A house with a basement furnace is a different job from a duplex apartment where the air handler sits above a closet ceiling.

Dryer vent cleaning is often one of our smaller jobs, and one of the more important ones. According to the U.S. Fire Administration, failure to clean is the leading factor contributing to clothes dryer fires in homes.

  • The number of supply vents and returns, and how many separate systems the home has.
  • The length and layout of the ductwork, including flex duct and tight runs.
  • The amount of dust, debris, or other contamination inside.
  • Access to the air handler, coils, and duct runs, including work in finished spaces.
  • For dryer vents: the length of the run, the number of turns, where the vent exits, and whether it goes up through the roof.

Apartments, co-ops, and building access

In the city, the building itself can shape the price. Many co-ops and condos set work hours, require us to book the service elevator, or need the super on hand for roof access. A boiler flue may only be taken out of service briefly during the city's heat season, when building owners must keep apartments heated, so some work has to be scheduled carefully. Parking and carrying equipment up several floors also add time. We ask about these details up front so the written price reflects the real job.

Why we give a written price after we see the job

We give you a written price after we look at the chimney, ducts, or vent. The quote lists what we will do, so you can compare it with other quotes and decide without pressure. If we find something during the work that changes the scope, we stop and talk with you before doing anything extra.

You have probably seen very cheap whole-house duct cleaning offers. The U.S. EPA warns consumers to research the process before responding to them. A price that low rarely covers a real cleaning of a full system, so these jobs often turn into upsells once the crew arrives, such as charges per vent, add-on sanitizers, or claims of mold that supposedly needs treatment. The EPA also advises caution with chemical treatments and says duct cleaning has not been shown to prevent health problems. It recommends cleaning when there is substantial visible mold growth, vermin, or excessive dust and debris, and we follow the same approach.

FAQ

Common questions

Don’t see your question? Call (908) 695-8489 and we’ll talk it through.

Can you give me a price over the phone?

We can talk through your situation and explain what usually drives the cost, but we give a firm written price only after we see the job. Access, flue condition, and the amount of buildup vary too much to quote accurately sight unseen.

Why does a Level 2 inspection cost more than a Level 1?

A Level 2 inspection includes a camera scan of the full flue and a closer look at areas a visual check can't reach. It takes more time and equipment. It's called for when you change an appliance or fuel, or when you buy or sell a home.

Why does my apartment or co-op job cost more than a house?

Building rules can add time. Limited work hours, booking the service elevator, coordinating roof access with the super, and carrying equipment through shared spaces all affect the job.

Do I need a new liner if my building switches from oil to gas?

The chimney has to be evaluated as part of an oil-to-gas conversion in New York City, and a new liner is often needed. Gas exhaust produces acidic condensate that can corrode a masonry flue. The cost depends on the flue's size, shape, and condition.

What's wrong with very cheap duct cleaning ads?

A very low advertised price rarely covers a full system, so the bill often grows on site through per-vent charges, chemical add-ons, or mold claims. The EPA suggests researching the process before responding to these offers and being careful with chemical treatments.

Will the price change once work starts?

Not without your approval. If we uncover something that changes the scope, such as hidden damage or a blockage, we stop, explain what we found, and give you an updated written price before going further.

Find out what your chimney or vents need

Tell us what you're noticing and where you live. We'll schedule an inspection, show you what we find and give you a written price before any work begins.

(908) 695-8489
Call (908) 695-8489 Request Service