Skip to content

Chimney Inspection Levels: What Level 1, 2 and 3 Mean for Your Home

Chimney inspections are not all the same. The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year, and chimney professionals use three inspection levels to match the depth of the inspection to your situation. The right level depends on what has changed in your home and how much of the chimney the technician needs to see. This guide explains what each level covers, when each one makes sense, what you receive afterward, and how to get ready for the visit. If you are not sure which level you need, our certified technicians can help you decide before we schedule.

Level 1: The Yearly Check When Nothing Has Changed

A Level 1 inspection fits a chimney that is used the same way it was last year, with the same appliance, the same fuel and no known problems. It is the standard yearly visit for most fireplaces, wood stoves and heating appliance flues.

The technician looks at the parts of the chimney, fireplace and venting that can be reached without tools or special equipment. The goal is to confirm the system is sound, clear of blockages and free of heavy creosote or soot buildup. If the flue needs cleaning, a chimney sweep can usually be done during the same visit.

  • Firebox, smoke chamber and damper, as far as they can be seen
  • Visible sections of the flue and liner
  • Chimney exterior, crown, cap and flashing where safely accessible
  • Connections between the appliance and the chimney
  • Signs of blockages such as nests, debris or fallen masonry

Level 2: When the System Changes or the Home Is Sold

A Level 2 inspection includes everything in Level 1 and goes further. The technician runs a video camera through the inside of the flue and checks accessible areas such as the attic, basement and crawl spaces where the chimney passes through. This shows cracks, gaps in the liner and deterioration that cannot be seen from the firebox or the roof.

In New York City, a common reason for a Level 2 is converting a boiler from oil to gas. When a building makes that switch, the chimney has to be evaluated as part of the work, and a new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue. We also recommend this level of inspection after a chimney fire, a lightning strike or storm damage, since those events can crack a flue without leaving obvious signs.

  • Installing a new heating appliance, stove or insert
  • Switching fuel, such as oil to gas or wood to gas
  • Buying or selling a home
  • After a chimney fire, lightning strike or storm damage
  • Relining or resizing the flue

Level 3: Reaching Hidden Hazards

A Level 3 inspection is used when a serious hazard is suspected and the only way to confirm it is to open part of the chimney or the building. That can mean removing sections of masonry, chase walls, interior finishes or the crown to reach the concealed areas.

This level is not routine. It usually follows a Level 1 or Level 2 inspection that turned up a problem the camera could not fully explain, such as a damaged flue near combustible framing. We discuss the reasons, the areas to be opened and the restoration plan with you before any work begins.

What You Receive After the Inspection

You should not have to take our word for what is happening inside your chimney. After every inspection, we walk you through what we found and give you the documentation to keep.

If the inspection finds a problem, the report connects it to the service that addresses it, whether that is chimney repair, chimney liner installation, a new chimney cap and chase cover, chimney waterproofing, fireplace and damper repair, or chimney rebuilding for severe damage. You can use the report to plan the work, share it with a buyer or seller, or keep it with your home records.

  • Photos of the chimney exterior, firebox, damper and problem areas
  • Video footage from the flue camera on Level 2 and Level 3 inspections
  • A written report describing the condition of each component
  • Clear notes on what is urgent, what can wait and what is in good shape

How to Prepare for Your Inspection Visit

A little preparation makes the visit faster and gives the technician a clearer view of the system.

  • Stop using the fireplace or stove at least a day ahead so the firebox and flue are cool
  • Clear the hearth and move furniture, rugs and decorations a few feet away
  • Make sure the technician can reach the attic, basement or boiler room if the chimney passes through them
  • Secure pets in another room during the visit
  • Note any odors, smoke, drafts, water stains or noises you have noticed
  • Have paperwork ready for any recent appliance change or fuel conversion

Timing Your Inspection in New York

New York City's heat season runs from October 1 through May 31, when building owners must keep apartments heated to the city's minimum temperatures. Scheduling your yearly inspection before heat season starts gives you time to complete any repairs before the boiler or fireplace is in steady use.

Many homeowners pair the chimney visit with dryer vent cleaning, since the U.S. Fire Administration identifies failure to clean as the leading factor contributing to clothes dryer fires in homes. Air duct cleaning is worth considering when there is substantial visible mold growth, vermin, or excessive dust and debris in the ducts.

Inspections

Three levels of chimney inspection

The NFPA 211 standard calls for a yearly inspection. Which level you need depends on what has changed since the last one.

  1. Level 1

    Annual check

    For a chimney and appliance that have not changed and will be used the same way: the readily accessible parts of the chimney, the flue and the connection, checked for soundness, blockages and deposits.

  2. Level 2

    Camera inspection

    When something changed — a new stove, insert or boiler, a fuel switch such as oil to gas, the sale of the home, or a chimney fire, storm or quake. Adds a video scan of the whole flue and the accessible attic, roof and crawl spaces.

  3. Level 3

    Concealed areas

    Only when a Level 1 or 2 points to a hidden hazard that cannot be checked any other way: parts of the chimney or building are opened to reach it.

How each level works

FAQ

Common questions

Don’t see your question? Call (908) 695-8489 and we’ll talk it through.

How often should my chimney be inspected?

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year, even if you rarely use the fireplace.

Which inspection level do I need?

Level 1 fits a system that has not changed. Level 2 is for a new appliance, a fuel switch, a home sale, or after a chimney fire or storm. Level 3 is only for hidden hazards that require opening part of the chimney or building.

Do I need an inspection when converting from oil to gas?

Yes. In New York City the chimney has to be evaluated as part of an oil-to-gas conversion, and a new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue.

Will a Level 3 inspection damage my home?

It involves opening specific areas, such as masonry or a chase wall, to reach a suspected hazard. We explain exactly what will be opened and how it will be restored before any work starts.

Can you clean the chimney during the inspection?

Often, yes. If the flue has creosote or soot buildup, a chimney sweep can usually be done during the same visit.

What will I get after the inspection?

You receive photos, flue camera video on Level 2 and Level 3 inspections, and a written report describing the condition of each component and any recommended repairs.

Find out what your chimney or vents need

Tell us what you're noticing and where you live. We'll schedule an inspection, show you what we find and give you a written price before any work begins.

(908) 695-8489
Call (908) 695-8489 Request Service